Last updated: November 3, 2026
The fastest way to remove a tree stump is to grind it below the soil line with a stump grinder. Small stumps can be dug out by hand. If you are not in a hurry, you can let a stump rot or burn it where local rules allow. Most homeowners pay about $120 to $210 to have one stump ground by a pro.
This guide covers each method step by step, the safety and legal checks to do first, what each option costs, and when it makes sense to hire help.

Stump Removal Methods at a Glance
| Method | How fast | Effort | Best for |
|---|---|---|---|
| Grinding | Same day | Low if hired, moderate if DIY | Most yard stumps, any size |
| Digging or pulling | Hours to days | High | Small stumps, or when roots must go too |
| Chemical or natural rotting | Years | Low but ongoing | Stumps in out-of-the-way spots |
| Burning | Days, plus drying time | Moderate | Rural sites where open burning is legal |
Before You Start: Safety and Legal Checks
Do these checks before you dig, grind or burn anything.
- Call 811. Gas, power and water lines are often buried near trees. Red Butte Garden at the University of Utah advises calling 811 well before any digging or grinding. The U.S. Department of Transportation calls 811 the top preventive step for safe digging.
- Check local rules. Some cities limit open burning, and some regulate tree work. Read our guide on whether you need a permit to cut down a tree on your property.
- Look at nearby trees. Roots of nearby trees can be grafted to the stump. Chemicals put on the stump can spread to them.
- Measure the stump. Cost and method both depend on diameter. Our tree diameter (DBH) calculator helps you size it.
- Pick your timing. Weather and soil conditions affect how easy the job is. See our guide to the best time to remove a tree stump.

Method 1: Grind the Stump
Grinding is the most common way to remove a stump. A grinder uses a spinning toothed wheel to chew the wood into chips. It does not pull out the whole root system. It removes the stump and the top of the main roots.
How deep to grind
Grinding depth can range from flush with the soil to more than a foot deep, according to University of Illinois Extension. Deeper grinding costs more. Red Butte Garden suggests 12 to 14 inches. The hole will be wider than the stump, because the grinder also removes the flared roots at the base.
Steps to grind a stump yourself
- Call 811 and wait for buried lines to be marked.
- Clear rocks, dirt and debris from around the stump. Rocks dull the teeth and can be thrown.
- Cut the stump as low as you safely can with a chainsaw.
- Wear eye, ear and leg protection. Keep people and pets well away. Grinders can throw rocks and chips at high speed.
- Follow the rental shop’s instructions. Work the wheel side to side in shallow passes, moving forward a little each time.
- Grind to the depth you need, then clean up the chips.
For more detail on technique and machine types, see our guide to effective methods for grinding tree stumps.
After grinding
Wood chips mixed into soil can tie up nitrogen as they break down. This can slow grass and plant growth. If you plan to grow lawn there, Illinois Extension suggests removing the chips and filling the hole with good topsoil. Expect the soil to settle as buried wood rots, so you may need to add soil a few times. Learn more about what happens to roots after stump grinding.
Method 2: Dig or Pull Out the Stump
Digging removes the stump and much of the root system. That matters if you want to build, pour concrete or plant a new tree in the same spot. It is also the hardest method to do by hand.
When hand digging works
Illinois Extension notes that some sources say trunks up to 15 inches across can be hand-dug. The author of that guide would not go much over 6 inches. Roots hold on hard. One half-inch root can need about 450 pounds of force to pull from the soil, according to research the guide cites. Shrub stumps are much easier. See how to get rid of stumps from bushes.
Steps to dig out a small stump
- Call 811 first.
- Leave a few feet of trunk if you can. It gives you leverage.
- Dig a trench around the stump to expose the main roots.
- Cut the roots with loppers, a root saw or an axe. Avoid using a chainsaw in dirt, because soil quickly ruins the chain.
- Rock the stump back and forth and keep cutting roots until it comes free.
- Fill the hole with soil and tamp it down.
Machine removal
Larger stumps need equipment. Pros use backhoes, excavators or loaders to dig out stumps and sever large roots. Some use cables and winches to pull them. Do not chain a stump to a car or truck. This can damage the vehicle and cause serious injury. For removing the full root mass, read our guide to tree root ball removal.
Method 3: Let the Stump Rot (Chemical or Natural)
Rotting is the cheapest and least physical method. It is also the slowest. Natural decay can take years. The speed depends on stump size, species, how long ago the tree was cut, sun, drainage and soil life.
Chemical stump removers
Many stump removers contain potassium nitrate (saltpeter). They do not dissolve a stump quickly. According to Illinois Extension, potassium nitrate draws water out of the wood. This dries the stump for burning, but it also harms the organisms that cause decay. The same guide cites research that chemical treatment speeds decay by about 25%.
Use chemicals with care. Red Butte Garden warns that any chemical strong enough to decay a stump can be dangerous to people, pets and wildlife. It can also reach nearby trees through grafted roots. If you want to protect nearby trees, choose grinding or natural rotting instead. Always follow the product label.
How to speed up natural rotting
Illinois Extension says helping natural decay can speed it up by as much as 50%. Its tips include:
- Add surface area. Cut the stump low. Drill several holes with a 1-inch bit, cut a crisscross pattern on top and remove the bark.
- Loosen the soil. Aerate the soil around the stump 12 to 24 inches deep.
- Keep it moist, not soggy. Water during dry spells, but avoid waterlogged soil.
- Add healthy soil. In poor soil, a thin layer of compost or good soil adds decay organisms.
- Cover it the right way. Use landscape fabric or a thick layer of wood chips, not plastic.
- Keep disturbing it. About every three months, cut, drill or pry at the softening wood.
Method 4: Burn the Stump
Burning can work in rural areas, but it carries real fire and legal risks. Check local open-burning rules first. Illinois Extension notes that some places also ban chemical pre-treatment before burning.
Key facts from Illinois Extension:
- A stump in the ground is hard to dry enough to burn. Digging around it helps it dry and lets air in.
- Do not pour gasoline or other fuel on a stump. It can contaminate the soil.
- A charcoal fire inside an open-ended metal cylinder is a safer setup.
- Stump fires can burn hot for many days. Never leave one unattended.
- High heat can sterilize the soil, and charred wood resists decay.
Keep water or a hose nearby and clear anything that can burn from the area. For a full walkthrough, see our guide to burning stumps safely.
Stop a Stump From Resprouting
A live stump can send up new shoots from its roots or base. Some species, such as the Bradford pear, are known for this. Illinois Extension advises treating the outer ring of sapwood on a fresh cut with a systemic herbicide that contains glyphosate or triclopyr. Follow the label for amounts and timing. Our guide on how to kill a tree stump explains this step in more detail.
Species also affects how a stump behaves and how hard it is to remove. If you are dealing with a pine, see our guide to pine stump removal.
How Much Does Stump Removal Cost?
Professional stump grinding is usually priced by the stump’s diameter. Here are typical 2026 prices from Lawn Love.
| Service | Typical cost |
|---|---|
| Stump grinding rate | $2 to $5 per inch of diameter |
| Minimum charge per visit | About $100 |
| One average stump | About $120 to $210 |
| Each additional stump, same visit | About $40 to $70 |
| Root grinding | About $150 per hour |
| Chip haul-away | $50 to $200 |
| Stump removal added to a tree removal job | About $180 to $525 |
For example, a 20-inch stump at $2 to $5 per inch comes to $40 to $100 for the grinding. The minimum charge brings that to about $100. Grouping several stumps into one visit saves money.
To get a number for your own yard, use our tree stump removal cost calculator. If the tree is still standing, start with our tree removal cost calculator and compare tree removal costs by size and type.
When to Hire a Professional
DIY works for small stumps in open spots. Hire a pro when:
- The stump is large or has many surface roots.
- It sits near a house, driveway, fence, septic system or buried lines.
- You have several stumps. The per-stump price drops on a single visit.
- You need roots removed to build or replant in the same spot.
- The tree was dead or decayed and may be unstable. See our dead tree removal cost guide.
- You do not want to handle a grinder, chemicals or fire.
Before work starts, ask the contractor for a certificate of liability insurance, as Red Butte Garden recommends. Also ask whether the quote includes 811 locates, chip cleanup and filling the hole.
How to Remove a Tree Stump FAQs
What is the fastest way to remove a tree stump?
Grinding is the fastest. A grinder can remove a typical yard stump in one visit. Digging takes longer, and rotting or burning can take days to years.
How long does it take a stump to rot on its own?
Natural rotting usually takes years. The time depends on size, species, sun, drainage and soil life. Drilling holes, loosening the soil and keeping it moist can speed it up.
Does potassium nitrate remove stumps quickly?
No. Illinois Extension says chemical removers do not dissolve stumps quickly. Potassium nitrate mainly dries the wood, which helps if you plan to burn it. It can actually harm the organisms that cause decay.
Is it legal to burn a tree stump?
It depends on where you live. Many areas limit or ban open burning. Check with your local fire department or city before you start.
Do roots keep growing after a stump is ground?
Roots of a dead stump slowly decay. A live stump of some species can resprout from the roots. Treating the fresh cut helps prevent this.
Can I plant a new tree where a stump was ground?
Yes, but remove the chips and add good topsoil first. Chips mixed into soil can tie up nitrogen. Plant a little off to the side if large roots remain.

Pingback: How to Get Rid of Stumps From Bushes
Pingback: Which Direction Will A Tree Fall With Hollow Spot
Pingback: How to Quote a Tree Removal Job: Step-by-Step Pricing Guide