🌳 Tree Diameter & DBH Calculator

Measure your tree and get its Diameter at Breast Height (DBH) instantly — used for tree value, size, and removal cost estimates.

Diameter at Breast Height (DBH)
0 in

Breast height = 4.5 ft (1.37 m) above ground, the standard point arborists use to measure a tree's diameter.

What Is DBH (Diameter at Breast Height)?

DBH is the standard way to measure a tree trunk. In the United States it is taken 4.5 feet (1.37 m) above the ground, a height chosen so measurements are consistent from tree to tree and skip the flared base of the trunk. Foresters, arborists, cities and tree services all use DBH to estimate a tree’s age, value, weight and removal cost.

How to Measure DBH

  1. Find 4.5 feet. Measure 4.5 feet up from the ground at the base of the trunk.
  2. Wrap a tape around the trunk at that height, keeping it level and snug. This gives the circumference.
  3. Convert circumference to diameter. Divide by pi (about 3.1416), or enter the circumference in the calculator above.

DBH = circumference ÷ 3.1416

Example: a trunk with a 63-inch circumference has a DBH of 63 ÷ 3.1416 ≈ 20 inches. Foresters often use a diameter tape (a “d-tape”), which is marked so it reads diameter directly.

Measuring Tricky Trees

Real trees are not perfect cylinders. These rules follow the New York State DEC DBH measurement guidelines:

SituationWhere to measure
Tree on a slope4.5 ft above the ground on the uphill side
Leaning tree4.5 ft along the trunk, in the direction of the lean
Branch, bump or swelling at 4.5 ftJust below the irregularity; note the height you used
Fork at or below 4.5 ftThe narrowest part of the main stem below the fork
Several stems splitting more than 6 in above groundMeasure each stem, then combine (see below)
Several stems within 6 in of the groundTreat each stem as a separate tree

Multi-stem trees

The preferred method is the root sum of squares: square each stem’s diameter, add them up and take the square root. For stems of 5, 6 and 8 inches: 25 + 36 + 64 = 125, and √125 ≈ 11 inches. Simply adding the stems (19 inches) overstates the tree’s size.

What DBH Tells You

DBH pairs naturally with height. Measure that from the ground with the tree height calculator or our guide on how to measure tree height.

Common Measuring Mistakes

  • Measuring too low. The trunk flares near the ground, so a measurement at knee height can overstate diameter by several inches.
  • Tape not level. A tape that slopes around the trunk reads long. Keep it horizontal all the way around.
  • Measuring over vines or loose bark. Ivy, vines and loose bark plates add to the reading. Slide the tape under vines where you safely can.
  • Mixing up circumference and diameter. A soft tape wrapped around the trunk gives circumference. Divide by 3.1416 before using the number anywhere that asks for diameter.

Worked Example: From Tape to Estimate

You wrap a tape around a maple at 4.5 feet and read 75 inches. The DBH is 75 ÷ 3.1416 ≈ 24 inches. That number can then go into the age, value and weight calculators. If the tree is removed, the stump will usually measure wider than 24 inches at ground level, so measure the stump itself for a grinding quote. For maple-specific problems and removal costs, see the maple tree guide.

Frequently Asked Questions

Why is DBH measured at 4.5 feet?

It is a consistent, easy-to-reach height above the flared base of the trunk, so measurements can be compared across trees and over time. Many countries outside the U.S. use 1.3 m instead.

How do I convert circumference to diameter?

Divide the circumference by 3.1416. A 47-inch circumference is about 15 inches in diameter.

Is DBH the same as stump diameter?

No. A stump is measured at ground level, where the trunk flares out, so stump diameter is usually larger than DBH. Use stump diameter for grinding quotes.

Can I measure DBH in centimeters?

Yes. The calculator accepts circumference in inches, centimeters or feet. Breast height in the U.S. standard is 4.5 feet, or 1.37 m.

Scroll to Top